Your car wipers have a very important job. Thanks to them, you can drive your car even in the rain. Windshield wipers can also help you clean your car window when washing your car. They are among the parts in your car that ensure safe driving.
All cars are equipped with two wipers on each side. In addition, a non-working windshield wiper is undesirable, as it affects your safety if you have to drive in the rain. This unwanted issue can appear due to several reasons which we are going to discuss here one by one.
Index
Why aren't my car wipers working?
A clean windshield is very important for seeing clearly ahead. Therefore, wipers play an important role in your safety, but only if they work correctly. Many have complained that their only windshield wiper has suddenly stopped working and they don't know why this happened. Here are some reasons why this unwanted condition occurs.
1. Loose wiper pivot nuts
The wiper arms are connected to the wiper motors or gears using nuts on a pivot. The nut holds the wipers securely at the pivot point and allows the wiper arms to work efficiently. If you find that your only windshield wiper is not working, the most common reason is a loose nut. If the nut is loose, the wiper arm will not move, and even if it does, it will not move far enough to clear the windshield. Tightening the nut may resolve this issue, but if it does not, it is recommended that you consult your mechanic.
See how to fix
If you find that your single wiper is not working properly, immediately check for loose wiper pivot nuts, as this is the most likely cause of such a problem. Obviously, the only way to fix this is to tighten the wiper pivot nuts. This is not a task that will take a long time. It only takes a few minutes to fix this problem. Once this is done, you will see that your broken wiper is now working perfectly as usual.
2. Torn wiper blade
Wiper blades are all about how your windshield wipers work. If you find that your only wiper is not working properly, another common reason is that the rubber edge on the wiper blade has broken. In that case, this wiper cannot touch the windshield properly to clean it. This condition can cause more downsides as the torn rubber rim leaves a small gap that allows dust and dirt to scratch the windshield. Therefore, it is recommended to replace the faulty wiper as soon as possible, both for your safety and that of your car.
See how to fix
Wiper blades with cracked rubber will not be able to do their duty well. The best thing to do is buy a new set of wiper blades for your car with the help of your mechanic and have the one that doesn't work replace. Wiper blades are not very expensive and the average replacement cost is $75 to $82. Auto mechanics normally recommend replacing wiper blades every six months. So replace them regularly whenever possible and keep your car in top condition.
3. Ice or snow buildup on wiper
Your windshield wipers can't handle heavy snow and can even cause one or both of your windshields to warp. This condition can even damage the wiper motor or transmission. So, if one or both of your windshield wipers stop working after a day of snow, you might blame yourself for using them before removing heavy snow from the windshield and taking them to a mechanic to fix the wipers. .
How to avoid the problem
The best way to take care of your wiper arms is to not use them to clear accumulated snow off your windshield, rather than worrying about fixing a bent wiper. It is better to remove the accumulated snow by hand, and then use the wiper to wipe the moisture from the windshield.
It is also recommended to repair your car with winter wiper blades if you regularly encounter heavy snowfall during the winter season. These windshield wipers are designed to clear snow and ice from your car's windshield.
4. Wiper motor failure
If the wiper motor fails, in most cases not just one, but both windshields will work. As with most electrical components, it's not surprising when the wiper motor stops working. In this case, as expected, your wipers will not move and it is recommended that you replace the wiper motor immediately.
See how to fix
You need to replace it when the existing wiper motor fails on your car. Replacing the wiper motor is a fairly simple task. All you have to do is remove the hood and other things that may have accumulated to reach the wiper motor. Once you get your hands on it, you can easily remove it and replace it with a new one.
5. Blown fuse
Sometimes the windshield wiper fuse can blow. Like most electrical circuits, fuses in windshield wipers are designed to be weak points. In case of wiper motor overload, the fuse is automatically turned off to prevent further damage. In this case, your two windshield wipers also refuse to work. You can easily fix it once you find the snag and replace the fuse. If the wipers stop working after that, you need to have them checked by a mechanic.
See how to fix
As mentioned earlier, you can simply replace the fuse if it is not damaged or buy a new one and plug it in place of the old fuse. Fuses are very cheap and you don't have to worry about spending a lot of money to fix the problem.
However, if you have trouble locating the fuse, you'll need to consult your car owner's manual. Fuse location is different for different vehicles.
Video guide:
Watch the video below to help you fix your wiper blades that are not working:
Common questions:
Here are some of the frequently asked questions about why only one wiper is not working, how do I know if the wiper fuse is blown, etc.?
Why is only one cleaner not working?
If the windshield wipers are not working, you will see that the motor is broken or the screw is loose., If the nut remains in position, the wiper arm is loose. Sometimes you need to remove the wiper arm, and sometimes you just need to tighten the screw.
How do I know if the windshield wiper fuse has blown?
You would know if the windshield wiper fuse has blown.
You need to locate the wiper fuse. Purchase a replacement fuse with the correct amperage and replace it.If your wipers come back to life, a blown fuse was the problem.
How much does it cost to repair a wiper motor?
The cost of replacing the wiper motor isbetween $250 and $300. Parts cost between $200 and $250. Installation is easy on most vehicles, so expect to pay just $50 to $100 in labor.
Can you drive with a windshield wiper?
If the car is equipped with a windshield wiper, that's fine.It would make driving difficult if you couldn't see around the car.
Are the two cleaners the same?
Windshield wiper blades are vehicle specific.On some vehicles, both blades are the same size.Wiper blade size is determined by the manufacturer and selected for proper fit to make it clear.
Do you need both cleaners?
It's a good idea to change them in pairs, as it's easier. Wipers are sold by size and can determine the side of the windshield. But you need to make sure you are using the right sizes when replacing your blades.
Is it easy to replace the wiper motor?
Replacing a faulty wiper motor is relatively easy. You need basic hand tools as well as knowledge and determination. A faulty wiper motor can cause the wipers to stop working.
Diploma
A non-working windshield wiper is not a serious problem in most cases. As long as you can determine what is causing the problem, you should be able to fix it quickly. In most cases, just the above reasons can be the cause of a broken wiper, so you don't have to worry too much as long as you are willing to take the necessary steps to care for your wiper or get it fixed right away.